December 10, 2023 9:59PM EST
1(888)626-4365

Lynch Now Offering HPUA & T Control Option from Sun Hydraulics

We are excited to announce the launch of Sun Hydraulics HPUA Hand Pump and the Sun Common (SC) cavity cartridge valves. These new SC cavity cartridges are optimized for lower-pressure systems. These valves boast a common SAE style cavity, which is compliant to SAE cavity standard ISO 17209:2013.

The HPUA Hand Pump

The HPUA is designed to provide hydraulic power to operate valves, cylinders, motors, and other hydraulic components in a wide range of industrial equipment. This valve is a screw-in, manual hand pump cartridge with dual integrated check valves.

It is manufactured to fit perfectly into the Sun Common SC-10-02 cavity, offering the following features:

  • Cavity SC-10-02
  • Series 1C
  • Capacity .442 in³
  • Maximum Operating Pressure 3000 psi
  • Valve Hex Size 7/8 in.
  • Valve Installation Torque 45 – 50 lbf ft
  • Seal kit – Cartridge Buna: 99C102007
  • Seal kit – Cartridge Viton: 99C102006

For more information:


Lynch is carrying the new T-control kit option for FNUC & DNUC.

The FNUC – T

FNUC-T is a 4-way, 3-position, electro-proportional, solenoid-operated directional valve with a pressure capacity of 3600 psi (250 bar) and is Sun Common Cavity.

This valve is direct actuated and requires no minimum hydraulic pressure for operation. Features include:

  • Cavity SC-10-04
  • Series 1C
  • Capacity 10 gpm
  • Maximum Operating Pressure 3600 psi
  • Typical Valve Leakage at 110 SUS (24cSt) 110 mL/min.@3600 psi
  • Response Time – Typical 50 ms
  • Solenoid Tube Diameter .75 in.
  • Valve Hex Size 1.00 in.
  • Coil Nut Torque 3.5 – 3.9 lbf ft
  • Valve Installation Torque 28 – 32 lbf ft
  • Mounting Bolt Installation Torque (T Control) 4.2 – 4.6 lbf ft
  • Model Weight (with coil) 1.20 lb
  • Model Weight 1.58 lb.

For more information:

THE DNUC – T

The DNUC-T is a direct-acting, solenoid-operated, 4-way, 3-position spool valve. This valve is direct actuated and requires no minimum hydraulic pressure for operation.

The DNUC-T comes with the following features:

  • Cavity SC-10-04
  • Series 1C
  • Capacity 7 gpm 
  • Maximum Operating Pressure 3600 psi
  • Typical Valve Leakage at 110 SUS (24cSt) 11 in³/min.@3600 psi
  • Response Time – Typical 50 ms
  • Switching Frequency 15,000 max. cycles/hr
  • Solenoid Tube Diameter .75 in.
  • Valve Hex Size 27 mm
  • Coil Nut Torque 3.5 – 3.9 lbf ft
  • Valve Installation Torque 28 – 32 lbf ft

For more information:

991-291- Momentary bi-directional, hand-actuated control kit, T Control

The 991-291 Momentary bi-directional, hand-actuated control kit, T Control, allows the operator to temporarily shift the valve by rotating the lever in either direction.

It is to be used in conjunction with the FNUC-T and the DNUC-T.

  • Material Zinc Plated Steel
  • Description Momentary Bi-directional Operation (T Control Option)
  • Mounting Bolt Installation Torque (T Control) 4.2 – 4.6 lbf ft
  • Model Weight 0.80 lb.

For more information:


We are excited to offer these products to our customers. Whether you are looking for a reliable hand pump or a highly efficient control kit, we have you covered.

If you’re interested in learning more information, reach out to a member of our Sales Team today by emailing sales@lynch.ca, or calling us toll-free at 1-888-626-4365.

Lynch Fluid Controls In Attendance at Plastec East, NY for the First Time!

 

 

We are excited to be attending Plastec East for the first time ever! Come visit Lynch at 2018 Plastec East convention New York at Booth 422.

Lynch is proud to be appointed a SUN Hydraulics distributor for the state of New York, plus four counties in Pennsylvania. We continue to bring value to our customers in the hydraulics market through high-performance screw in cartridge valves, electro-hydraulics, manifolds, and integrated package solutions. We are also proud to offer innovative electronic control, display and instrumentation solutions.

Looking forward to seeing all the new and familiar faces there!

June 12 – 14, 2018
Jacob K. Javits Convention Center
Booth 422

 

Success at The Big Event Canadian Mining Expo 2018

It was great to see long standing customers & “dig into the world of mining!”

Lynch joined over 400 exhibitors in showcasing our products and services. The Big Event connects the mining industry with investors, equipment manufacturers and customers for their products. Every year the big Event keeps getting bigger! Kenward Mah, Director of Strategic Partnerships and Glenn Peon, Business Development Manager enjoyed their time in Timmins, Ontario.

 

June 6 – 7, 2018

McIntyre Community Centre
85 McIntyre Road
Timmins, ON, Canada
P4N 8R8
Booth R6-13
https://canadianminingexpo.com/

Forging a U.S. Presence – How to Access the U.S.

BUFFALO, N.Y.—Lynch Fluid Controls Inc., established in 1987, is a manufacturing company based in Ontario, Canada, producing hydraulic and motion control products. They supply the aerospace, military, material handling, construction, and oil and gas industries. In Canada, they own multiple facilities totaling 63,000 sq. ft. and employing upwards of 90 employees.Ernie Lynch, President Lynch Fluid Controls

Despite all that success, Lynch knows, like a great painting, his business is never finished. In 2017, he put his eyes on a new frontier: American expansion.

With the help of Invest Buffalo Niagara, in just a few months, Lynch USA, the U.S. subsidiary company, was born. Since, they have set up a warehousing and distributing space, with hopes to break into American manufacturing in phase two of their expansion. In each of their first 10 months, Lynch USA has hit targets, reaching 210% of their goal in June.

Read the full article here.

 

Lynch Fluid Controls U.S. expansion takes off without a hitch

Invest Buffalo Niagara worked with Lynch to set up cross border meetings so that they could get information on incorporation, tax and accounting, banking, immigration, and human resource compliance in the U.S. Research concerning workforce, and colleges and universities was given to help the business case.

“Owning A business is like making a painting that never dries” – Ernie Lynch

Invest Buffalo Niagara also coordinated the site selection process and helped find their ideal site. In their first phase, they have set up a warehousing and distribution space. In each of their first 10 months, LynchUSA has hit targets set, reaching 210% of their goal in June. Their current location in Niagara County has space for eventual expansion into manufacturing.

Learn more about INVEST Buffalo Niagara here.